| |
| The
new Trylon TSF Cougar Safety Rail system offers the
ultimate peace of mind for tower workers. Cougar Safety
Rail features smooth operation plus the lowest wind load
ratings of any fall protection system. With its lightweight
yet heavy-duty aluminum rail and trolley, the Cougar Safety
Rail system provides instant fall arrest with less than
1 inch (2.54 cm) movement.
|
| System
Features |
|
- Field-proven
reliability of Trylon TSF's robust rail system design
principles
- Durable
bronze rollers
- Proven
to stand-up to the elements
- Increased
mobility (Class AS and FRL approved) allows rapid
climb and descent
- No
binding in side-to-side movement during climb
- Reduced
need to lean back, well-suited to confined spaces
- SafetyLokT
feature: Cannot operate upside down
even if rail is installed upside down
- Completely
compatible with existing Trylon TSF rail systems
over the years
|
|
| Trolley
Features |
|
- Precision-made
6061-T6 aluminum extrusion - will never rust!
- Stainless
steel components and hardware
- Brake
lever action and teeth bear on thick wall of rail, eliminating
any need for notches or stops, as with other systems.
- Orientation
lock-out device for extra safety - SafetyLokT
- Die-extruded
6061T6 aluminum alloy - will never rust!
- Unique
tubular design
- Minimum
wind loading and extra structural strength
- Galvanized
steel hardware attaches to both round and angular
steps at any point along the rail
- Rugged
internal splice bar provides maximum strength
- Positive
brake-stop pawl action allows less than 1 inch
(2.54 cm) movement for instant fall protection
- Accepts
multiple trolleys
- Trolleys
are removable
- Complies
with OHSA requirements
- First
in Canada with CSA certification (Z259.2, Type
1, Class B device)
|
|
|
| Easy
Installation |
|
- Locate
rail at center of ladder to allow balanced foot placement
- Clamp every 4 to 5 feet (1.2 to 1.5 m) as rungs permit.
First clamp should be about 1 foot (.3 m) from lower end
of rail. Top clamp should be on top rung
- For best result, place clamp bolts in continuous T-slot
and hand-tighten before raising rail sections into place.
Put splice sections into rail tops before raising next
section into place. Leave 1/16-in. (.2 cm) opening at
each joint for expansion and contraction
|
|
| Secure
Climbing |
|
- Slide
trolley onto rail
- Connect
karabiner to front "D" ring on properly fitted body
harness
- Lean
slightly away from rail to disengage pawl, and climb
or descend in the same way
- Releasing
tension automatically engages the lock
|
|
|
Important
note: Ladder type, rung size, rung spacing and other
pertinent information should be given when ordering.
|
To download a color brochure, click here
To download Canadian part numbers and suggested list prices, click here
|